JVC GY-HM200U Instructions Manual page 19

1 Open the SD card cover by sliding the cover
in the direction indicated by the arrow.
2 Insert an SD card with the notched corner
pointing up.
The status indicator of the card slot to which the
card was inserted lights up in red.
3 Close the SD card cover in the direction
indicated by the arrow.
Formatting (Initializing) SD Cards
When the following cards are inserted, [!FORMAT]
appears at the remaining media display area.
Format the card using the camera recorder menu.
Unformatted SD cards
0
SD cards formatted under different
0
specifications
Caution :
Be sure to format the SD card on this camera
0
recorder. SD cards formatted on a PC and other
peripheral equipment cannot be used on this
camera recorder.
[!RESTORE] appears at the remaining media
0
display area when an SD card that requires
restoring is inserted.
1 Select [System] B [Media] B [Format
Media].
2 Select the slot of the SD card to be
formatted and press the Set button (R).
Format Media
Format Slot
Format Slot
.
3 The status of the selected SD card appears.
2
Set
4 Select [Format] and press the Set button
(R).
Format Media
Format
Cancel
.
5 Formatting starts.
Formatting...
.
6 Formatting is complete.
When formatting is complete, "Complete" appears
and the camera recorder returns to the [Format
Media] screen.
Memo :
During formatting, menu operation is
0
unavailable but you can start recording.
However, this is only available when a
recordable SD card is inserted in the other slot.
Formatting cannot be performed in the following
0
cases.
Recording is in progress on the SD card to be
0
formatted.
SD card is not inserted.
0
Write-protect switch of the SD card is set (z
0
is displayed).
Caution :
If you format the SD card, all data recorded on
0
the card, including video data and setup files,
will be deleted.
4
Set
Inserting an SD Card
19