Attaching/Detaching the
Hood
Attaching the Hood
Align the markings on the camera recorder and
hood; turn the hood in the direction of the arrow
(clockwise) until it is locked.
.
Detaching the Hood
To detach the hood, turn the hood in the
0
direction opposite to attaching it
(counterclockwise).
.
Caution :
Remove the hood when attaching a filter,
0
teleconverter or wide converter to the front of the
lens.
16
Attaching/Detaching the Hood
Configuring the Initial
Settings
When the power is first turned on, the Initial Setting
screen for performing the initial settings in the
camera recorder appears.
Set the date/time of the built-in clock in the [Initial
Setting] screen.
All operations are disabled until initial settings are
complete.
.
Memo :
It is recommended to use the AC adapter as the
0
power supply.
Attach the lens cap.
0
1 Hold down the lock button (blue) at the
center of the [POWER ON/OFF] switch to set
to "ON".
A language selection screen appears.
For U models
0
Language
English
Français
Español
.
For E models
0
Language
English
Français
Deutsch
Italiano
Español
Pусский
.