Philips BDL3215E/00 Service Manual page 186

186
186
Command name
Audio parameters set
Volume get
Volume set
Volume limits
Miscellaneous info
Smart power
Video alignment
Serial Code Get
Tiling Get
Tiling Set
2. Compatibility Test
3rd Party HDMI/PC Test: TBD
10.5 Design quality and reliability review and validation procedure
These are activities that should be executed by Supplier and MMD group per product creating process. Supplier
must provide whole quality and reliability testing and evaluation report to DQE. DQE will be responsible for reviewing
the design quality and reliability report with verification and validation.
10.5.1 There are design quality and reliability reviews for each product respectively
The design quality and reliability review is required whenever a new product is starting to be created from supplier in
either electrical or mechanical parts.
During design and evaluation phase, detailed design quality and reliability reviews are required from EVT stage to
DVT and PVT stage respectively.
10.5.2 Quality and Reliability evaluation and testing report
Supplier should provide product quality and reliability evaluation and testing report in each product developing
milestone to DQE for review. This is not limited to three times. Intensive and comprehensive design reviews are
recommended whenever required.
10.5.3 General Review Procedure
1) Review DQE pending items of previous review meetings.
2) Check the current status of all tests and evaluations which should be done and provided by supplier before the
meeting.
3) Discuss the design quality and reliability by means of circuit walk through, assembly and disassembly and
assess the potential risks.
4) List down suggestions /attention points /remaining problems and action plan. (Or countermeasure).
Set Get
Command Command
Command
Code
0x42
0x45
0x44
0xB8
0x0F Operating hours
0xDD Dimming backlight
0x70
0x15
0x23
0x22
Remarks