Functional Requirements; Power; Picture - Philips BDL3215E/00 Service Manual

164
164
• Display video color -
•
Picture centering -
• Over scan-
• Contrast Ratio -
• View angle (CR>10) -
• Residual image -
• Contouring -
• Blue stretch -
• Green enhance -
• Black stretch -
• De-interlace -
• Y/C separation -

4. Functional Requirements

4.1 Power

•
When POWER ON = FORCED ON, Display goes to ON state when mains is applied, secondary user
actions cannot switch off the Display.
•
When POWER ON = STANDBY, Display goes to STANDBY when mains is applied.
•
When POWER ON = ON, Display goes to ON state when mains is applied.
•
When POWER ON = LAST STATUS, Display goes to Last status (ON or STANDBY) depending of the
previous state of Display before power off.

4.2 Picture

Picture control handles the initialization of the video parameters and the recall of the video personal preferences.
Some video parameters can also be changed via the picture sub menu.
Picture at full white, pattern, brightness at 50 %, and contrast at 50%. The color,
temperature at the screen center should be:
Normal
CCT 9300º K
0.283 ±0.015
x
0.297 ± 0.015
y
H & V ≤ 0.5 %. (for 480i/p, 576i/p, 720p, 1080i/p)
≤ 3 % (top) & ≤ 3 % (bottom) for Display, 480i, 576i
≤ 3% (left) & ≤ 3 % (right) for Display, 480i, 576i
≤ 3 % (top) & ≤ 3% (bottom) for 480p, 576p, 720p, 1080i/p
≤ 3 % (left) & ≤ 3 % (right) for 480p, 576p, 720p, 1080i/p
0% (fit to screen) for PC mode vertically and horizontally.
4000: 1 (brig0htness controls is at 50%, contrast is at 100%)
H & V > 178º
Recover < 2 min. after burn in the checkerboard image for 2 hours.
Minimum contouring visible.
Yes
Yes
Yes
3D MA (motion adaptive)
3D comb filter
Native
10000º K
0.280 ± 0.030 0.314 ± 0.015
0.290 ± 0.030 0.324 ± 0.015
Warm
6500º K