I /O Connectors - Philips BDL3215E/00 Service Manual

162
162
I / O Connectors
2.7
Connectivity overview:
RGB will be renamed to VGA
Rear Connectors:
•
Power input:
•
AC switch:
•
PC input:
•
VGA D-Sub connector pin assignment:
Pin Signal Assignment
1 Red video
3 Blue video
5 GND
7 Green GND
9 +5V (Supply from PC for DDC circuit)
11 GND
13 H-sync
15 DDC serial clock
•
HDMI input: Type A includes digital video and audio, HDCP supported.
HDMI type A connector pin assignment:
Pin Signal Assignment
1 TMDS Data2+
3 TMDS Data2–
5 TMDS Data1 Shield
7 TMDS Data0+
9 TMDS Data0–
11 TMDS Clock Shield
13 CEC
15 SCL
17 DDC/CEC Ground
19 Hot Plug Detect
•
CVI input:
•
AV input:
•
Speaker output:
•
RS232:
3-pin IEC-320-C13 socket mains AC in.
Mains switch at line.
15 pins VGA D-Sub Female connector with silver 3.5mm
Mini-jack audio stereo connector
Pin
2
4
6
8
10
12
14
16
18
YPbPr with R/L Cinch audio in.
S-Video, CVBS Cinch video and R/L Cinch audio in.
10 7 w (at 8ohm) stereo output snap type connectors.
DB9 RS232 male type connector.
Pin Signal Assignment
2 Green video
4 GND
6 Red GND
8 Blue GND
10 Sync GND
12 DDC serial data
14 V-sync
Signal Assignment
TMDS Data2 Shield
TMDS Data1+
TMDS Data1–
TMDS Data0 Shield
TMDS Clock+
TMDS Clock–
Reserved (N.C. on device)
SDA
+5V Power