Grandstream Networks HT502 User Manual page 37

Firmware Server Path
IP address or domain name of firmware server.
Config Server Path
IP address or domain name of configuration server.
XML Config File The password used for encrypting the XML configuration file using OpenSSL.
Password This is required for the phone to decrypt the encrypted XML configuration file.
HTTP/HTTPS User
The user name needed to authenticate with the HTTP/HTTPS server.
Name
HTTP/HTTPS The password needed to authenticate with the HTTP/HTTPS server.
Password
Always send HTTP Default is Send HTTP Basic Authentication Information only when challenged. If set
Basic Authentication to Always, device will send configured user name and password within HTTP request
Information without server sending authentication challenge.
Firmware File Prefix
This field enables user to store different versions of firmware files in one single directory
on the firmware server. If configured, only the firmware file with the matching prefix will be
downloaded.
Firmware File Postfix
This field enables user to store different versions of firmware files in one single directory
on the firmware server. If configured, only the firmware file with the matching postfix will
be downloaded.
Config File Prefix This field enables user to store different configuration files in one single directory on the
configuration server. If configured, only the configuration file with the matching prefix will
be downloaded.
Config File Postfix This field enables user to store different configuration files in one single directory on the
configuration server. If configured, only the configuration file with the matching postfix will
be downloaded.
Allow DHCP Option 66 If set to "Yes", configuration and upgrade server information can be obtained using DHCP
to override server option 66 from DHCP server located in customer's environment.
Automatic Upgrade Choose "Yes" to enable automatic upgrade and provisioning. If select "Check every
minutes" input the amount of minutes you want it to check for update. If select "Yes, daily
at hour" make sure to input the hour of the day you want it to check for update, e.g. for 11
pm type 23. If select "Yes, weekly on day" make sure you input the day of the week (in
format 0-6, 0 is Sunday) you want it to check for update. When set to No, HT502 will only
do the following option you select; "Always check for New Firmware at Boot up" will check
for new firmware every time the device reboots. "Check New Firmware only when F/W
pre/suffix changes" will check for updates only when the pre/suffix has been changed.
FIRMWARE VERSION 1.0.12.4 HT502 USER MANUAL Page 35 of 54