Configuration Guide; Configuring The Ht502 Through Voice Prompts - Grandstream Networks HT502 User Manual

CONFIGURING THE HT502 THROUGH VOICE PROMPTS

DHCP M
ODE
Select voice menu option 01 to enable HT502 to use DHCP.
STATIC IP M
ODE
Select voice menu option 01 to enable HT502 to use STATIC IP mode, then use option 02, 03, 04, 05 to
set up IP address, Subnet Mask, Gateway and DNS server respectively.
F S IP A
IRMWARE ERVER DDRESS
Select voice menu option 13 to configure the IP address of the firmware server.
C S
ONFIGURATION ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U P
PGRADE ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F U M
IRMWARE PGRADE ODE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
WAN P W A
ORT EB CCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.
FIRMWARE VERSION 1.0.12.4

CONFIGURATION GUIDE

IP A
DDRESS
HT502 USER MANUAL Page 25 of 54