Keys Fitness KF-HCL Owner's Manual page 8

Assembly
NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled.
STEP 3
Connect Top Frame (4) to Half Cage and Guide Rods (7) using:
Place High Pulley Cable (34) into positions using:
Place Low Pulley Cable (35) into positions using:
 x () Bolt M1x80
4 x (3) Washer M10
 x (4) Nylon Lock Nut M1
5 x (14) Big Pulley
6 x (18) Big Pulley Spacer
10 x (0) Washer 10
3 x (19) Bolt M10x70
4 x (14) Big Pulley
1 x (18) Pulley Bracket
4 x (6) Bolt M10x50
 x (5) Bolt M10x0
 x (0) Washer 10
4 x (1) Nylon Lock Nut
 x (6) Bolt M10x50
 x (13) Plate for Pulley
4 x (1) Nylon Lock Nut
 x (19) Bolt M10x70
8 x (0) Washer 10