Related Manuals for Keys Fitness Strength Training Equipment KF-45
Summary of Contents for Keys Fitness Strength Training Equipment KF-45
- Page 1 Owner’s Manual Read all precautions and instructions in this manual before using this equipment. 215-00093 10/06 Rev A KF-45...
- Page 2 Table of Contents Before You Start Important Safety Information Assembly Parts List Exploded View Warranty Information 5-10...
-
Page 3: Important Safety Information
It is the owner’s responsibility to ensure that all users of this unit have read the Owner’s Manual and are familiar with safety information and precautions. • This Keys Fitness unit should only be used on a level surface and is intended for indoor use only. Keys Fitness recommends an equipment mat be placed under the unit to protect the floor or carpet and for easier cleaning. -
Page 4: Assembly
This manual will guide you through the assembly process. If at any time you are having trouble with the assembly or use of this product, then please contact us at our Keys Fitness Helpline. We have trained service techni- cians on site to take care of you, our valued customer. - Page 5 Assembly...
- Page 6 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 1 Connect Main Frame (2) to U Base Frame (1) by securing with Bolts (19), Washers (23) and Nylon Nuts (22). Make sure that the Main Frame Safety Tape is facing up when connecting to U Base Frame (1).
- Page 7 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 2 Slide Main Upright (4) down onto Main Frame (2) and secure with Bolts (19), Washers (23) and Nuts (22).
- Page 8 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 3 Slide Roller Pad Tube (7) into Main Upright (3). Place Upholstered Roller Pads (9) onto Roller Pad Tube (7) and secure with Roller Pad Tube Caps (11). We recommend using a rubber hammer to place Roller Pad Tube Caps (11) onto Roller Pad Tube (7).
-
Page 9: Assembly
Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 4 Slide Telescoping Pad Support (4) into Main Upright (3). Pull Pop Pin in order to choose different settings in Telescoping Pad Support (4). - Page 10 Assembly NOTE: Hand tighten bolts and nylon nuts until machine is fully assembled. STEP 5 Secure Pads (13) to Telescoping Pad Support (4) with Bolts (20) and Washers (23). 10 10...
-
Page 11: Parts List
Parts List Ref # Part # 223-00872 223-00873 223-00874 223-00875 210-00022 210-00257 219-00537 206-00392 206-00395 206-00391 206-00390 206-00388 228-00198 206-00389 206-00138 206-00118 206-00394 202-00215 202-00634 202-00635 202-00636 202-00091 202-00093 202-00094 206-00393 228-00199 215-00093 KF-45 Parts List Rev B description U BASE FRAME, KF-45 T BASE FRAME, KF-45 MAIN FRAME, KF-45 ADJUSTMENT FRAME, KF-45... -
Page 12: Exploded View
Exploded View 1 1... - Page 13 Product. To obtain warranty service, you must contact a Keys authorized retailer, service technician or Keys Fitness at our phone number located in this manual. Any parts determined to be defective must be returned to Keys to obtain warranty service. You must prepay any shipping charges, export taxes, custom duties and taxes, or any other charges associated with transportation of the parts or Product.
- Page 14 Keys Fitness Products, L.P. 4009 distribution drive, Suite 250 Garland, Texas 75041 Customer Service: 1-888-340-0482...