Figure 60: Gxv3275 Sca Settings On Lcd - Grandstream Networks GXV3275 User Manual

group will be notified of an incoming call and will be able to answer the call from the phone with the SCA
extension registered.
All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the
line and places an outgoing call, and all the users of this group will not be able to seize the line until the
line goes back to an idle state or when the call is placed on hold (with the exception of when multiple call
appearances are enabled on the server side).
In the middle of the conversation, there are two types of hold: Public Hold and Private Hold. When a
member of the group places the call on public hold, the other users of the SCA group will be notified of
this by the yellow-flashing button and they will be able to resume the call from their phone by pressing the
line button. However, if this call is placed on private-hold, no other member of the SCA group will be able
to resume that call.
To enable shared call appearance, the user would need to register the shared line account on the phone.
In addition, they would need to enable SCA and configure SCA options via LCD or web GUI.
To configure SCA via LCD, go to Settings->Personalized Account and select one account first. The tap
on "Shared Call Appearance (SCA)" to turn it on.

Figure 60: GXV3275 SCA Settings on LCD

To configure SCA via web GUI, go to Account page->SIP Settings to fill out the options in the following
figure.
Firmware Version 1.0.1.20 GXV3275 User Guide Page 70 of 146