Using The Front-Panel Buttons - Pace DC550P Operator's Manual

Using the front-panel buttons

You can use the buttons on the front panel to operate your home terminal, if, for example, there is a problem with your remote control.
However, to make the "HDTV-display" settings, you must use the front-panel buttons (see page 16).
power button Window that receives signal from
To turn your home remote control (do not block it)
terminal on/off
USB connector
power
ENERGY STAR
power light Shows the program channel number or
(around button) the time (or sometimes other information)
Lights green when your As long as your home terminal is receiving
home terminal is on power, the display remains lighted, even
and red when it is off when your home terminal is turned off
OPERATING YOUR HOME TERMINAL (cont.)
Smart-card slot
MAIL: Flashes when, for
BYPASS: Lights while the
example, an emergency
bypass feature is on
alert message is received.
HDTV: Lights for a high-definition source
signal and during display setting (see page 16)
display button
To select appropriate screen
resolution, aspect ratio etc.
BYPASS HDTV
display guide
To display an on-screen guide
To display on-screen program information
To remove on-screen information
settings button
To display on-screen
menus
select button (+)
To select items in
menus/guides
ch+
vol-
info exit settings
ch-
To change channel or move up/
down in an on-screen menu/guide
To adjust volume or move left/
right in an on-screen menu/guide
vol+
15