Connecting The Power Supply Unit To Your Set-Top Box; Connecting Equipment To The Wall Ac Outlets; Turning Your Set-Top Box On And Off; Lightning Storms - Pace Mi3 User Manual

CONNECTING THE EQUIPMENT (cont.)
Do not connect your set-top box (or any other equipment such as a TV or VCR) to the power supply until
you have properly connected all the other cables.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The
wide blade or the third prong are provided for your safety.

Connecting the power supply unit to your set-top box

Before you insert the power supply unit into the wall AC outlet, connect the 5 volt DC cord from the power
supply unit to the socket labeled "+5.0V DC IN 3A MAX. POWER" on your set-top box's rear panel.

Connecting equipment to the wall AC outlets

Connect your set-top box's power supply unit, and the plugs on the power cords from your TV, DVD player,
and any other equipment, into wall AC outlets. If these outlets have switches, switch them ON.

Turning your set-top box on and off

After you have connected your set-top box's power supply unit to the wall AC outlet (and switched this outlet
ON, if it has a switch), the Power light around the
set-top box is in standby. Press the
light around the Power button should light up blue, to show that your set-top box is on.
To turn your set-top box on or off at any time, press the
Never turn off your set-top box by simply disconnecting it from the power supply. If you need to disconnect
your set-top box, first turn it off by pressing the

Lightning storms

Disconnect your set-top box's power cord during lightning storms. A lightning storm may affect your set-top
box, if it is on during the storm. It may appear that it has stopped working, but you can easily restore its
operation as follows:
Unplug your set-top box's power supply unit from the wall AC outlet. Then plug this power supply unit in
again at the wall AC outlet (and, if there is a switch by this outlet, switch it to its ON position).

Front panel

Remote light
Lights when you press a button
on your remote control.
Your cable TV service-provider determines the digital channels, services, and screen information that you see
on your TV when you use your set-top box and its remote control.
Consult the information supplied by your cable service-provider for details on how to make the most of the
digital cable services. Also read the operating instructions that are supplied with your remote control.
WARNINGS
Power button should light up red, to show that your
Power button on your set-top box's front panel to turn it on. The Power
Power button on the front panel.
Power button on the front panel.
Data light
Lights when a message has
been received.
Mi3 (IPW9001) USER GUIDE (501-2C14501)
Power light
Lights blue when your set-top
box is on and lights red when
your set-top box is in standby.
Record light
Lights when a recording
is being made.
Power button
To turn your set-top
box on/off.
9