Pace DC100X Quick Start Manual

Pace DC100X
Quick Start Guide
Thank you for choosing the Pace DC100X Set-top.
Follow the set-up instructions in this Quick Start Guide to
ensure you get the best from your set-top.
To ensure you use this product safely, please read all the
safety information included in this document.
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright protection
technology must be authorized by Macrovision, and is intended for home and other
limited pay-per-view uses only unless otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
Pace and are trademarks and/or registered trademarks of
Pace Micro Technology plc.
Other trade marks listed herein are the property of their respective owners.
The model number, serial number and electrical rating of this set-top are on a label
on its base.
Copyright © 2007 Pace Micro Technology plc. All rights reserved.

SAFETY INFORMATION

Do not perform any servicing unless you
are qualified to do so by pace. Refer all
This digital set-top has been manufactured
servicing to qualified service personnel.
and tested with your safety in mind.
Servicing the set-top yourself will
However, improper use can result in
invalidate the warranty.
potential electric shock or fire hazards.
On the rear panel of your set-top there
To avoid defeating the safeguards that
is a tamper-evident label that states
have been built into your set-top, please
"Warranty void if broken or removed".
observe the precautions discussed in this
document. To reduce the risk of fire or electric shock,
do not expose this set-top to rain or
Warnings on your set-top
moisture.
CAUTION ATTENTION
INSTALLATION
RISK OF ELECTRIC SHOCK RISQUE DE CHOC ELECTRIQUE
DO NOT OPEN NE PAS OUVRIR
The installation of your set-top should
be carried out by a qualified installer and
The lightning flash with
should conform to local codes.
arrowhead symbol, within a
Note to the installer
triangle, is intended to alert you
This reminder is provided to call the
to the presence of uninsulated
attention of the cable-TV-system installer
"dangerous" voltages within
to Section 820-40 of the National
your set-top's enclosure that
Electrical Code (USA), which provides
may be of sufficient magnitude
guidelines for proper grounding and, in
to constitute a risk of electric
particular, specifies that the cable ground
shock to persons.
shall be connected to the grounding
The exclamation point within a
system of the building, as close to the
triangle is intended to alert you
point of cable entry as is practical.
to the presence of important
instructions in the literature
Service address:
accompanying your set-top.
Pace Micro Technology (Support
Other warnings
Services) Ltd.,
To reduce the risk of electric shock, do
3701 FAU Boulevard, Suite 200,
not remove the cover of your set-top.
Boca Raton, Florida, 33431, U.S.A.
There are no user-serviceable parts inside it.
IMPORTANT SAFETY INSTRUCTIONS
Before you install or use the apparatus, you must read and understand these
Important Safety Instructions. At all times when using the apparatus you
must follow these Important Safety Instructions to reduce the risk of fire,
electrical shock and injury to persons.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. If the
provided plug does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the apparatus.
When a cart is used, use caution when moving the
cart/apparatus combination to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
In addition to the Important Safety Risk of fire or scorching
Instructions, please read the Safety
Never place naked flame sources, such
Information below.
as lighted candles, on or adjacent to your
Power sources
set-top.
You must operate your set-top only
Ambient temperature
from the type of power source indicated
The operating temperature range of
on the marking label. If you are not
your set-top is 32-104°F. If the ambient
sure of the type of power supply to
temperature around your set-top falls
your home, consult your dealer or
outside this range, you must correct this in
local power company. If you move your If you move your
order for your set-top to work correctly
set-top between locations at different
and safely. For example, if the temperature
temperatures, allow it to reach room
is too high, switch on the air conditioning.
temperature before you apply power to it.
Ventilation
Overloading
Slots and openings in the casing of your
Do not overload wall outlets, extension
set-top are provided for ventilation, to
cords or other power outlets as this can
ensure reliable operation of your set-top
result in a risk of fire or electric shock.
and to protect it from overheating.
Lightning
• Never block the ventilation openings
For added protection for your set-top by placing your set-top on a bed, sofa,
rug or other similar surface.
during a lightning storm, or when it is left
unattended and unused for long periods
• Never cover the ventilation openings
of time, disconnect the cable system from with items such as newspapers, table-
your set-top. See also item 13 in the cloths or curtains.
Important Safety Information.
• Do not place your set-top in a built-
in installation such as a bookcase
Placement and mounting
or rack unless proper ventilation is
Do not place your set-top on an unstable
provided or you have adhered to the
or uneven surface. Your set-top may fall, manufacturer's instructions.
causing serious injury to a child or adult
• Maintain a minimum distance of 1 inch
and serious damage to your set-top. If around your set-top for sufficient
you mount your set-top, for example to a ventilation.
wall or ceiling, follow the manufacturer's
See also item 7 in the Important Safety
instructions and use a mounting accessory
Instructions.
recommended by the manufacturer. See
also item 12 in the Important Safety
Instructions.
Terms and Conditions for Use of Software ("Terms")
THE PRODUCT TO WHICH THESE TERMS RELATE (THE "PRODUCT")
INCORPORATES SOFTWARE WHICH IS OWNED BY PACE MICRO TECHNOLOGY
PLC ("PACE") OR ITS THIRD PARTY LICENSORS (THE "SOFTWARE"). BEFORE
USING THE PRODUCT PLEASE READ THESE TERMS. IF YOU DO NOT AGREE TO
THESE TERMS YOU MAY NOT USE THE PRODUCT AND SHOULD IMMEDIATELY
RETURN THE PRODUCT TO YOUR SUPPLIER. THESE TERMS ALSO APPLY TO ANY
MODIFICATIONS, UPDATES OR SUPPLEMENTS TO THE SOFTWARE PROVIDED
TO YOU. FOR PURPOSES OF THESE TERMS, "YOU" MEANS YOU, THE END USER,
AND YOUR PRODUCT SUPPLIER, UNLESS THE CONTEXT REQUIRES OTHERWISE.

A. License Grant and Conditions

1. Pace, or your supplier, if applicable, grants you a non-exclusive, non-transferable,
limited license to use the Software solely as integrated with, incorporated into, or
provided for use in connection with the Product.
2. Pace reserves all rights not expressly granted to you under these Terms.
3. You may not transfer any of your limited rights in the Software without the prior
written consent of Pace, and if consent is provided then the Software shall only
be transferred in conjunction with the transfer of the Product AND ONLY IF the
transferee has read and agreed to accept these Terms.
4. You must ensure that the copyright, trademark and other protective notices
contained in the Software are maintained and not altered or removed.
5. The Software is protected by copyright and other laws and international copyright
and other treaties.
6. The Software provided hereunder is licensed (not sold). Pace is NOT transferring
title or any ownership rights in the Software to you.
7. All title and intellectual property rights in and to the Software and all modifications,
updates, enhancements and derivative works of the Software are owned exclusively
by Pace or its licensors and you agree to execute any document reasonably
requested by Pace to evidence such ownership rights.
8. Certain third party software used in connection with the Product may be made
directly available to you by operating system or other third party providers. Use of
such Software is also subject to the terms of any applicable agreement between you
and such third party.

B. License Restrictions

Except as expressly permitted by statute you may not:
1. use the Software in conjunction with any other hardware or equipment other than
the Product;
Transporting Entry of objects and liquids
Move the combination of set-top and
Never push objects of any kind into
cart with care. Quick stops, excessive
your set-top through openings as they
force and uneven surfaces may cause
may touch dangerous voltage points or
the combination of set-top and cart
short-out parts that could result in fire
to overturn. See also item 12 in the
or electric shock. Never spill liquid of any
Important Safety Instructions.
kind on your set-top.
Replacement parts
Water and moisture
When replacement parts are required, Do not expose this set-top to dripping
be sure that the service technician or splashing and ensure that no objects
has used replacement parts specified filled with liquids, such as vases, are placed
by the manufacturer or that have the on your set-top. See also item 5 in the
same characteristics as the original part. Important Safety Instructions.
Unauthorized substitutions may result
in fire, electric shock or other hazards.
SAVE THIS INFORMATION FOR
See also item 14 in the Important Safety
FUTURE REFERENCE
Instructions.
Safety check
Regulatory
Upon completion of any servicing or information
repairs to your set-top, ask the service
technician to perform safety checks to
CAUTION: Do not attempt to
determine that your set-top is in its
modify your set-top without written
proper operating condition. See also item authorization from the manufacturer.
14 in the Important Safety Instructions. Unauthorized modification could
void your authority to operate your
set-top.
2. copy or modify all or any portion of the Software;
3. incorporate all (or any portion of) the Software into other programs developed
or used by (or on behalf of) you;
4. reverse engineer, decompile, decrypt or disassemble the Software (or any
portion of the Software); or
5. export, transfer or re-export the Software in violation of any applicable law.

C. Termination

These Terms are effective until terminated. You may terminate these Terms by
returning the Product to your supplier. These Terms will terminate automatically
without notice if you fail to comply with these Terms or any other written
agreement between you and Pace. Upon termination you must return the Product
to your supplier.

D. Disclaimer

1. EXCEPT AS SET FORTH IN ANY WRITTEN AGREEMENT BETWEEN
YOU AND PACE (OR YOUR SUPPLIER), THE SOFTWARE IS (TO THE
EXTENT PERMITTED BY LAW) SUPPLIED "AS IS" AND PACE AND
ITS LICENSORS EXPRESSLY EXCLUDE ALL WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING (BUT NOT LIMITED TO) WARRANTIES OF
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR PURPOSE AND
NON-INFRINGEMENT.
2. EXCEPT AS SET FORTH IN ANY WRITTEN AGREEMENT BETWEEN YOU
AND PACE, IN NO CIRCUMSTANCE WILL PACE BE LIABLE FOR ANY
DIRECT, INDIRECT, CONSEQUENTIAL, SPECIAL, PUNITIVE OR INCIDENTAL
DAMAGE (INCLUDING LOSS OF PROFITS, BUSINESS INTERRUPTION,
LOSS OF DATA OR THE COST OF PROCUREMENT OF SUBSTITUTE
GOODS, TECHNOLOGY OR SERVICES) ARISING OUT OF THE USE OR THE
INABILITY TO USE THE SOFTWARE.

E. General

These Terms are governed by the laws of the State of New York and you may only
bring claims exclusively in New York courts and Pace shall be entitled to bring a
claim in the courts of any jurisdiction. Any failure by Pace to enforce any of its rights
hereunder or applicable law shall not constitute a waiver of such rights. Pace's
licensors and suppliers shall be third party beneficiaries of this License Agreement,
as applicable.
YOUR USE OF THE PRODUCT CONSTITUTES YOUR ACKNOWLEDGEMENT
THAT YOU HAVE READ THESE TERMS AND AGREE TO BE BOUND HEREBY.
Epilepsy And
NOTE
On-screen Images
Your set-top has been tested and found
Certain people are susceptible to epileptic
to comply with the limits for a Class B
seizures or losing consciousness when
digital device, pursuant to Part 15 of the
faced with certain types of flashing lights in
FCC Rules. These limits are designed to
our daily environment.
provide reasonable protection against
These people are exposed to the risk of
harmful interference in a residential
seizures if they watch certain television
installation. Your set-top generates,
images. This phenomenon may appear even
uses and can radiate radio-frequency
when the subject has no previous history
energy and, if not installed and used in
of this problem or has never suffered an
accordance with the instructions, may
epileptic seizure.
cause harmful interference to radio
If you, or a member of your family, has communications.
already suffered symptoms linked to
However, there is no guarantee
epilepsy (seizure or loss of consciousness)
that interference will not occur in a
in the presence of stimulation by light,
particular installation. If your set-top
please consult your doctor before using
does cause harmful interference to
this product.
radio or television reception, which can
If you or any person using the equipment
be determined by turning your set-top
experiences dizziness, involuntary
off and on, you are encouraged to try
movements or convulsion, please
to correct the interference by one or
immediately stop viewing and consult a
more of the following measures:
doctor.
• Reorient or relocate the receiving
antenna.
• Increase the separation between
your set-top and the receiver.
• Connect your set-top to an outlet
on a circuit different from that to
which the receiver is connected.
• Consult your dealer or an
experienced radio/TV technician for
help.