Image Properties - Black Box iCOMPEL 2U Series User Manual

iCOMPEL Digital Signage User Guide (V9.2.3)
Show the web page indefinitely – The iCOMPEL shows the web page always.
Show the web page for – The iCOMPEL shows the web page for the period you specify.
Web Page Size Choose the option you require:
Use Zone Size – Display whole movie in the zone.
Show Part of Web Page – Display only a 'window' view of the movie in the zone:
o Left edge offset – Amount to indent the window relative to the page's left edge.
o Top edge offset – Amount to indent the window relative to the page's top edge.
o Web Page width – Full width of page.
o Web Page height – Full height of page.
Note: This is only available if you set the User Interface Policy to Detailed or Expert on the UI Options page.
Volume Enter the volume as a percentage of the maximum volume.
Opacity To allow background items to be visible, enter a percentage to match the opacity required. 100% is completely
opaque and 1% is almost completely transparent.
Zoom Enables the Zone to zoom in on the HTML content. Smaller than 100% zooms out (to get the whole web page
in a small zone for example) or larger than 100% zoom in, to fill the zone with part of a web page.
Page Background Check the HTML Page allows transparent backgrounds box to enable a transparent background (for
example, to allow view of a background zone).
Note: Enabling this prevents Adobe Flash playing correctly in the HTML

3.4.3 Image Properties

The following properties apply to zones enabled as an Image player:
Fade In You can set the image to fade in with one of these options:
No Fade in – Image appears immediately without fading in.
Fade In n.n seconds – Image fades in from the background. Specify the number of seconds for the fade-in
to last (default is 1.5 seconds).
Cross fade from previous image – Image fades in as the previous image fades out. You must also
set the previous image's Fade Out option to Cross fade to next image. If no previous image is set
to cross fade, this image fades in from the background in the number of seconds you specify (default
is 1.5 seconds).
Duration Select the duration you require:
Show image indefinitely – The iCOMPEL shows the image always.
Show the image for – The iCOMPEL shows the image for the period you specify.
Fade Out You can set the image to fade out with one of these options:
54
Copyright © 2010-2013 Black Box Network Services. All Rights Reserved.
724-746-5500 | blackbox.com
zone.