Black Box iCOMPEL 2U Series User Manual page 121

3G Modem:
If your iCOMPEL can connect to a 3G network, complete the following information then click the
reboot the iCOMPEL:
Enable Select whether you want to connect by 3G or not:
Disable 3G network – The iCOMPEL will not use the 3G network.
Enable 3G network – The iCOMPEL will use the 3G network.
PPP If the 3G network requires authentication, enter the username and password.
Authentication
PIN If the 3G network requires a PIN, enter the PIN.
Access Point If the 3G network requires an Access Point Name (APN), enter the APN.
Name
Wireless:
Use these options to manage the iCOMPEL connections to wireless networks.
The iCOMPEL will only connect to a wireless network if:
1. You have enabled the wireless interface.
2. You have defined the wireless network settings. If you define multiple networks, you cannot specify which one the
iCOMPEL will prefer.
3. The wireless network is in range.
Wireless has its own set of tabs and you use them as follows:
Enable/Disable Select the Disabled or Enabled option depending on whether you want to use wireless or not. Click the
Defined Networks Lists the networks you have already defined. Manage the networks using the buttons displayed next to each
network:
clicking this button disconnects it.
the details.
whether you want the iCOMPEL to try connecting to this network.
enabled wireless). This breaks any existing wireless connection. If you restart the iCOMPEL, it may not
reconnect to the same network.
Copyright © 2010-2013 Black Box Network Services. All Rights Reserved.
button to switch:
– Click to delete this network from your list. If the iCOMPEL is currently connected to the network,
– Click to change the network configuration. When complete, click the Save Change button to update
or – Displays according to the current setting for the network. Click to disable or enable
– Click to connect to this network. The iCOMPEL will attempt to make the connection (if you have
724-746-5500 | blackbox.com
Setup
button and
121