International Settings; Backing Up Your Player - Black Box iCOMPEL 2U Series User Manual

Remote Keypad:
The iCOMPEL can respond to button presses on a infra-red controller or remote keypad. The buttons are:
Volume up and down – Adjusts the master volume level up and down in 10% divisions. The iCOMPEL indicates the new
volume at the top right of the screen.
Station up and down – Selects the next station up or down in the list of available ad hoc TV or radio stations. The
iCOMPEL indicates the new station, or that none are available, at the top right of the screen.
Four programmable buttons: A, B, C, D – Provides interaction with layout and playlists. If you have not programmed the
button with an action, the iCOMPEL reports that in a message at the top right of the screen.
The status message on the Remote Keypad tab indicates if the iCOMPEL has the infra-red receiver connected or not. The
iCOMPEL requires the infra-red receiver to enable it to received remote keypad inputs.

9.3.6 International Settings

Use the International page to choose language and country preferences for the screen output. You should choose the
setting that best matches the expectations of those viewing the screen.
Note: These are different from the language and localization settings of the user interface, which are determined by the
browser settings.
The settings on the International page are used by:
The HTML player – To provide a preferred language and locale to web sites that support localization.
The text clock – To determine locale-specific date and time formats if you have not specified explicit formats.

9.4 Backing Up Your Player

In case of problems, you should maintain regular backups of the media content files and settings that your iCOMPEL uses.
See Backup Contents
152
Use the Setup > Maintenance & Troubleshooting > Backup & Restore page to create and save the backup files. You
save the files on a USB device attached to the iCOMPEL (for example, a USB stick or external disk drive, depending on
how much space your backup needs). If needed later, you can restore those files and settings onto this or another
iCOMPEL.
To create a backup:
1. Attach a USB device to the iCOMPEL.
2. On the menu bar, click Setup and select Maintenance and Troubleshooting > Backup & Restore.
3. Click the Create Backup tab.
4. If you want to create a new folder to hold the backup:
a. Enter the folder name in the Named field.
b. Click the
c. Click the new folder's link to specify it as the backup location.
5. Click the
Copyright © 2010-2013 Black Box Network Services. All Rights Reserved.
for details of what is backed up.
button.
button. It can take several minutes for the iCOMPEL to create the backup.
724-746-5500 | blackbox.com
Setup
141