Black Box iCOMPEL 2U Series User Manual page 126

iCOMPEL Digital Signage User Guide (V9.2.3)
Click the tab for the option you require:
Firewall – Examining and configuring the firewall and other security services settings.
126
Master Password – Changing the iCOMPEL master password.
127
LDAP – Detailing access control using the Lightweight Directory Access Protocol.
128
LDAP Expert – Entering XML-based LDAP parameters. (Only displayed if you have set the User Interface Policy to
128
Expert.)
Firewall Status – Monitoring the detailed firewall activity report.
127
LDAP Tests – Testing your LDAP configuration.
127
SSL Certificates – Using customized Secure Socket Layer certificates.
128
Firewall:
The Firewall tab allows you to examine and configure the firewall and other security service settings.
To change your security settings, complete the relevant options then click the
iCOMPEL:
Firewall Service IP Address Filtering – Default: Disabled. Check this box to prevent any access to the iCOMPEL except from
Settings the Allowed IP Addresses.
Allowed IP Addresses – Enter the IP addresses that can access the iCOMPEL, not forgetting to include
your own. To allow more than eight IP addresses, specify a range using the standard syntax (for example,
entering 192.168.1.0/24 allows access for all IP addresses between 192.168.1.0 and 192.168.1.255).
HTTP Service Supported Protocols – Default: HTTP and HTTPS. Select either HTTP or HTTPS to restrict access to that
Settings protocol. You cannot manage the iCOMPEL without either HTTP or HTTPS enabled.
HTTP Ports – Default: 80. Modify or add if you want your iCOMPEL to accept HTTP connections through
different ports.
HTTPS Ports – Default: 443. Modify or add if you want your iCOMPEL to accept HTTP connections through
different ports.
FTP Service Service State – Default: Enabled. Uncheck this box to disable FTP access.
Settings
Supported Protocols – Default: FTP. There are no other options.
FTP Ports – Default: 21. Modify or add if you want your iCOMPEL to accept FTP connections through a
different port.
Passive Port Range – Default: 59000-59009. Modify the Low Port and High Port values to specify a different
range.
Transfer Rate – Default: Limit to 2500 KiB/Second. Modify the Limit to value to specify a different transfer
rate.
SSH Service SSH Ports – Default: 22. Modify or add if you want your iCOMPEL to accept FTP connections through a
Settings different port.
Movie Player Service State – Default: Disabled. Check this box to enable the unicast listener service.
126
Copyright © 2010-2013 Black Box Network Services. All Rights Reserved.
724-746-5500 | blackbox.com
button and reboot the