Black Box iCOMPEL 2U Series User Manual page 123

Rebroadcaster Settings:
To configure rebroadcasting, complete the following information then click the
button:
Enabled Check the Rebroadcast a Digital Station option to enable rebroadcasting. If you enable it, the iCOMPEL TV
card is disabled for analog
Station Check the TV or Radio option and select the station from the drop-down list.
Stream As Enter a descriptive name for the station. This is the name that is visible in streaming announcements for other
iCOMPEL players to pick up. If you use a generic name, you can configure a different station here and the
other iCOMPEL players will pick it up by referencing the same generic name.
Media Streams Check the streaming option that best matches your requirements.
Stream Address Specify the address the client needs to listen to for the broadcast.
Port Specify the port number the client needs to listen on for the broadcast.
TTL Enter the number of hops required. For example, 1 means the stream will reach the network. Increase the TTL
by 1 for each multicast router the stream has to pass through.
SAP Address Enter the address that the iCOMPEL sends SAP announcements to.
Digital Tuning:
If you have completed the tuning process before, the iCOMPEL displays a list of the tuned stations. To audition a station,
click its button (the iCOMPEL auditions it on the screen and stops showing the scheduled layout).
To scan for and tune to digital TV and radio stations, follow these steps:
1. Click the
takes approximately 8 to 20 minutes depending on circumstances. During the process, the iCOMPEL displays a
progress notice on the screen instead of the scheduled layout.
2. After the iCOMPEL completes the scan, click the
button to revert to a previous channel list.
3. If you wish, click the
Analog Settings:
If you have selected analog stations before, the iCOMPEL displays a list of the stations. To audition a station, click its
button (the iCOMPEL auditions it on the screen and stops showing the scheduled layout). To delete a station, click its
button.
To add a station, follow these steps:
1. Select a channel from the drop-down list.
2. Enter a name to identify in the field next to the list.
Copyright © 2010-2013 Black Box Network Services. All Rights Reserved.
TV, digital TV and radio, and Composite and S-Video capture.
button. The iCOMPEL starts scanning for digital TV and radio stations. This
button to audition any of the new stations on the screen.
724-746-5500 | blackbox.com
button to store the channel list or click the
Setup
123