Planet IGSW-2840 User Manual page 289

Rx Last EAPOLVer
Rx Last EAPOLSrc
Tx EAPOL Total
Tx EAP Req/Id
Tx EAP Req/Oth
4.11.9.6 Windows Platform RADIUS Server Configuration
1. Setup the RADIUS server and assign the client IP address to the switch. In this case, field in the default IP Address of
the switch with 192.168.0.100. And also make sure the shared secret key is as same as the one you had set at the
switch RADIUS server – 12345678 at this case.
2. Configure ports attribute of 802.1X, the same as "802.1X Port Configuration".
The protocol version number carried in the most recently received EAPOL frame.
The source MAC address carried in the most recently received EAPOL frame.
The number of EAPOL frames of any type that have been transmitted by this
Authenticator.
The number of EAP Req/Id frames that have been transmitted by this
Authenticator.
The number of EAP Request frames (other than Rq/Id frames) that have been
transmitted by this Authenticator.
Figure 4-11-24 Windows Server RADIUS Server setting
Figure 4-11-25 802.1x Port Configuration
289
User's Manual of IGSW-2840