Change Pin; Cell Ringer - AT&T TL96273 Complete User's Manual

Bluetooth
Bluetooth setup

Change PIN

You are required to enter a PIN when establishing a Bluetooth connection. The
default PIN of your telephone base is 0000.
To change the PIN:
1. Press MENU
2. Press or
CID
press SELECT.
3. Press or
CID
SELECT. The telephone base displays ENTER NEW PIN
and the existing PIN.
4. Use the dialing keys to enter a new 4-digit code.
• Press
MUTE
• Press and hold
• Press
CID
5. Press SET to save. You hear a confirmation tone.

Cell ringer

If this feature is on and you have connected an iPhone (iOS 4.1 or later) to your
telephone system, the telephone plays your iPhone ringtone when there is an
incoming call.
1. Press MENU
2. Press or
CID
SELECT
.
3. Press or
CID
SELECT
.
4. If there is more than one paired device on the device list,
press or
CID
press SELECT. Otherwise, skip to the next step.
5. Press or
CID
NOTE: The quality of ringtone played on your telephone is subject to individual ringtone
characteristics.
on the telephone base in idle mode.
to highlight Bluetooth, then
DIR
to highlight Change PIN, then press
DIR
/DELETE to erase a digit.
/DELETE to erase all digits.
MUTE
or to move the cursor to the right or left.
DIR
on the telephone base in idle mode.
to highlight Bluetooth, then press
DIR
to highlight Cell ringer, then press
DIR
to highlight the desired device, then
DIR
to choose
DIR
On or Off, then press
29
BLUETOOTH
Device list
Download dir
Change PIN
BACK
ENTER NEW PIN
BACK
BLUETOOTH
Download dir
Change PIN
Cel l ringer
BACK
CELL RINGER
On
Off
Cel l ringer
BACK
SET .
SELECT
0000
SET
SELECT
SET