4. Press and enter the IP address for the NTP server. If the deskset does not use
an NTP server, you must manually enter the time and date settings.
5. Press Save.
Line Menu
Use the Line menu to configure line-specific settings for the phone.
To use the Line setting menu:
1. From the Admin Settings menu, press to highlight Line, and then press
SELECT.
The Line menu appears.
2. Highlight the desired line, if necessary, by pressing , and then press SELECT.
The full configuration menu for that line appears.
You can configure:
Display name
User ID
Authorization ID
Authorization Password
SIP Registrar Server IP
Registrar Server port
Proxy server IP
Proxy server port
Register (Yes or No)
Answer page (Manual or Auto)
For more information about these settings, see SIP Account Management on page
21.
3. Edit the Line settings using the dial pad and the soft keys available for each
setting:
Backspc—deletes a character
123—enables you to enter numbers, lower case letters, or upper case letters
with the dial pad. Does not appear when the setting accepts numbers only.
Save—saves and applies the new settings
Edit—enables you to edit the setting (appears for the Password setting)
Press or to advance to the next character.
VSP725 Administrator and Provisioning Manual
16
Using the Phone Menu