Answering system
Message playback
To listen to messages at the telephone base:
/PLAY/
Press
playback.
To listen to messages on a cordless handset:
1. Press MENU/
2. Select >Play messages.
•
If there are new and old messages, select >Play new msgs or >Play
old msgs.
•
If there are only new or only old messages, they will play automatically.
Options during playback
When messages are playing on the telephone base:
•
Press q/VOL/p to adjust the message playback volume.
•
Press
/S�IP to skip to the next message.
•
Press
/REPEAT to repeat the message. Press twice to hear the previous
message.
•
Press X/DELETE to delete the message.
•
/
Press
PLAY
When messages are playing on the handset:
•
Press
PHONE/FLASH to stop playback. The screen shows Call back?, then
press MENU/SELECT,
caller if the caller's number is available. If the dialing format used is not
correct, then use the following option to choose the correct dialing format
before calling back the caller.
•
Press MENU/SELECT to pause playback and show the caller ID information
if available. From here, you can press
press # to show different dialing options (page 20), or press
/SPEA�ER
SPEA�ER to call back the caller. If you do not call back within 10
or
seconds, message playback resumes automatically.
•
Press q
/VOLUME or p
CID
•
Press EQ
to adjust the message playback audio quality.
•
Press 6 to skip to the next message.
•
Press 4 to repeat the message. Press twice to hear the previous message.
•
DELETE
Press
MUTE/
•
Press 5 to stop the playback.
•
Press
/SPEA�ER
SPEA�ER to switch between speakerphone mode and handset mode.
Press
STOP.
/PLAY
when the handset is not in use.
SELECT
/STOP to stop playback.
PHONE/FLASH, or
/VOLUME to adjust the message playback volume.
DIR
to delete the message.
/STOP again to end the message
/SPEA�ER
SPEA�ER to call back the
OFF/CANCEL to resume playback,
28
PHONE/FLASH