Create Directory Entries; Create A New Directory Entry - AT&T CL83203 Complete User's Manual

Directory

Create directory entries

Create a new directory entry

1. Press MENU/
2. Press q or p
CID
/SELECT.
MENU
3. Press q or p
CID
4. Press /SELECT.
MENU
5. Use the dialing keys to enter a telephone number (up to
30 digits) when prompted.
Press q
•
CID
or right.
• Press
MUTE
telephone base to erase a digit.
• Press and hold
X/DELETE on the telephone base to erase all digits.
• Press and hold
dialing pause (a p appears).
-OR-
Copy a number from the redial list by pressing
REDIAL/
PAUSE
REDIAL/
PAUSE
/SELECT to copy the number.
MENU
/SELECT to move on to the name.
6. Press
MENU
• The display shows Number already saved if the number
is already in the directory. You cannot save the same
number twice.
7. Use the dialing keys to enter a name (up to 15 characters)
when prompted. Each time you press a key, the character on that key
appears. Additional key presses produce other characters on that key.
See the chart on next page.
• Press q
CID
Press 0 to add a space.
•
• Press
MUTE
to erase a character.
• Press and hold
telephone base to erase all characters.
• Press a>A to change the next letter to upper or lower case.
in idle mode to enter the main menu.
SELECT
to scroll to Directory, then press
DIR
to highlight Add contact.
DIR
or p
to move the cursor to the left
DIR
/DELETE on the handset or X/DELETE on the
/DELETE on the handset or
MUTE
/PAUSE to enter a three-second
REDIAL
and then q
CID
repeatedly to locate the number. Press
or p to move the cursor to the left or right.
DIR
/DELETE on the handset or X/DELETE on the telephone base
/DELETE on the handset or X/DELETE on the
MUTE
or p
, or pressing
DIR
59
Answering sys
>Directory
p
q
Review
>Add contact
p
q
ENTER NUMBER
888-883-2445 _
ENTER NAME
Robert Brown_
Saved