Dial Mode; Web Address - AT&T CL83203 Complete User's Manual

Telephone settings
Handset settings
NOTE: If in the future, your telephone service provider requires you to dial ten digits to
make a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the call ID log. With the home area code displayed,
press and hold
The home area code is now restored to its default setting of _ _ _ (empty).

Dial mode

The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
2. Use or
q
CID
/SELECT.
MENU
3. Use q or
CID
/SELECT.
MENU
4. Use q or
CID
press /SELECT. The screen shows DIAL MODE is touch-
MENU
tone or DIAL MODE is pulse. There is a confirmation tone
and the screen returns to the previous menu.

Web address

Use this feature to view the AT&T website address.
1. Press MENU/
2. Use or
q
CID
/SELECT.
MENU
/DELETE until the digits are deleted, and then press
MUTE
in idle mode to enter the main menu.
SELECT
to scroll to Settings, then press
p
DIR
p to scroll to Dial mode, then press
DIR
to highlight Touch-tone or Pulse, then
p
DIR
in idle mode to enter the main menu.
SELECT
to scroll to Web address, then press
p
DIR
22
/SELECT.
MENU
Home area code
>Dial mode
p
q
DIAL MODE
>Touch-tone
p
q
Settings
Web address
>
p
q
www.telephones.
att.com