Telephone settings
Telephone base settings
NOTE: If in the future, your telephone service provider requires you to dial ten digits to
make a local call (area code plus telephone number), you need to delete your home
area code and dial out locally from the caller ID log. With the home area code displayed,
press and hold X/DELETE until the digits are deleted, and then press
The home area code is now restored to its default setting of _ _ _ (empty).
Dial mode
The dial mode is preset to tone dialing. If you have pulse (rotary) service, you
must change the dial mode to pulse dialing before using the telephone.
To set the dial mode:
1. Press MENU/
main menu.
2. Use
q
or
CID
/SELECT.
MENU
3. Use
or
q
CID
/SELECT.
MENU
4. Use
q
or
CID
then press
MENU
and the screen returns to the previous menu.
Web address
Use this feature to view the AT&T website address.
1. Press MENU/
main menu.
2. Use
q
or
CID
/SELECT.
MENU
in idle mode to enter the
SELECT
p
to scroll to Settings, then press
DIR
to scroll to Dial mode, then press
p
DIR
to highlight Touch-tone or Pulse,
p
DIR
/SELECT. There is a confirmation tone
in idle mode to enter the
SELECT
to scroll to Web address, then press
p
DIR
33
/SELECT.
MENU
Home area code
>Dial mode
p
q
DIAL MODE
>Touch-tone
p
q
Settings
Web address
>
p
q
www.telephones.
att.com