Product Use - Barco FS35 Addendum

4 Product Use

For basic operations, set-up and safety precautions, please refer to the main user
guide included with the product.
The FS35 is capable of displaying both daytime images, as well as night vision stimulated
content using the fourth infrared chip in the display engine. By operating and adjusting the
dedicated IR Menu options described in the MENU section, the projector is able to display
the full spectrum of the simulation scenarios (see examples below).
• Daytime scenario: Bright scenarios with high lumens output with crisp colors showing all
details. Typically full power to the RGB LED's and no power to the fourth infrared LED.
• Evening scenario: Low illuminated scenarios at evening/dusk where the picture is dimmed
by adjusting the RGB LED's. Fewer details are visible to the unaided human eye
compared to daytime scenarios.
• Limited visibility scenario: Night time image, where the visible RGB LED is dimmed to
very low lumens output by using the custom IR menu. Details are barely seen with the hu-
man eye. Using the infrared LED and NV goggles in addition gives full spectrum NV simula-
tion modus. For pitch black scenarios the visible RGB LED's are turned off, only keeping the
infrared LED showing the content.
If you start in infrared only mode and do not have your NV-goggles available in terms
of being able to see and navigate the menus: Press 4 times on the LIGHT button on
the keypad and the visible RGB field turns on.
9