Factory Preset Programmes - Danfoss 103E5 Installation And User Manual

Factory Presets
The unit is supplied with the following preset programme
which will be active after the unit has been reset.
1st ON
1st OFF
2nd ON
2nd OFF
3rd ON
3rd OFF
N.B. 2nd ON and 2nd OFF are set to the same time. These 2
times are ignored by the programme therefore the heating will
just come on once in the morning and once in the evening. If
you want the heating to come on in the middle of the day set
the 2nd ON and 2nd OFF to the times you require.
Accepting the preset times
If you are happy to use the settings above, you don't need to
do anything else.
To accept the presets press the PROGRAMME button until the
colon in the display begins to fl ash.
Your unit is now in RUN mode.
Mon-Fri or All
days in 24hr mode
6.30am
8.30am
12.00pm
12.00pm
5.00pm
10.30pm
Sat-Sun*
(5/2day mode only*)
7.30am
10.00am
12.00pm
12.00pm
5.00pm
10.30pm
15