Table of Contents
Advertisement
AXIS Q8414-LVS Network Camera
Events
•
Play Audio Clip – See Audio Clips on page 27.
•
PTZ Control
-
Preset Position – Go to a preset position.
-
Guard Tour – Start a guard tour. See Guard Tour on page 30.
•
Record Video – Record video and audio to a selected storage. To record audio, use AAC audio encoding and make sure that
audio is enabled in the selected stream profile.
•
Send Images – Send images to a recipient.
•
Send Notifications – Send a notification message to a recipient.
•
Status LED – Flash the LED indicator. This can for example be used to validate triggers such as motion detection during
product installation and configuration.
Add Recipients
The product can send media files and messages to notify users about events. Before the product can send media files or notification
messages, you must define one ore more recipients. For information about available options, see Recipient Types on page 39.
To add a recipient:
1. Go to Events > Recipients and click Add.
2. Enter a descriptive name.
3. Select a recipient Type.
4. Enter the information needed for the recipient type.
5. Click Test to test the connection to the recipient.
6. Click OK.
Recipient Types
The following recipients are available:
Recipient
Email
FTP
HTTP
Network Share
TCP
Use with action
Send Images
Send Notification
Send Images
Send Images
Send Notification
Send Images
Send Notification
Notes
An email recipient can contain multiple email addresses. For
more information about email recipients, see Set Up Email
Recipients on page 40
A network share can also be used as a storage device for
recorded video. Go System Options > Storage to configure
a network share before setting up a continuous recording or
an action rule to record video. For more information about
storage devices, see Storage on page 50.
39
Advertisement
Table of Contents
