Setting Up Tracking - COBHAM Explorer 710 User Manual

Setting up tracking

You can set up the EXPLORER 710 to report to a server at certain time intervals. To set up
tracking, do as follows:
1. From the Control panel
2. To enable tracking of the EXPLORER 710, select Enable tracking.
3. At Tracking and HDR, select Share HDR connection or Disable HDR connection.
When tracking is enabled, you cannot use a full HDR or BGAN X-Stream connection, so you
must select one of these two options:
• Share HDR connection: When Tracking is enabled and a HDR connection is started,
the terminal will use part of the HDR bandwidth for tracking.
• Disable HDR connection: As long as Tracking is enabled, you cannot start a HDR
connection.
98-140012-B

, select Tracking.
Setting up tracking
Chapter 4: Using the web interface
60