Planet GS-5220-48T4X User Manual page 28

MGB-TLA60 1000
MGB-TLB60 1000
10Gigabit Ethernet Transceiver (10GBase-X SFP+)
Model Speed (Mbps)
MTB-SR
MTB-LR
1. It is recommended to use PLANET SFP on the Managed Switch. If you insert an SFP transceiver
that is not supported, the Managed Switch will not recognize it.
2. Port 45 to Port 48 are a shared SFP slot that supports the Gigabit and Fast Ethernet SFP
transceiver.
3. Port 49 to Port 52 are a shared SFP+ slot that supports the 10 Gigabit SFP+ transceiver and
Gigabit SFP transceiver.
1. Before we connect the GS-5220-48T4X to the other network device, we have to make sure both sides of the SFP
transceivers are with the same media type, for example: 1000Base-SX to 1000Base-SX, 1000Bas-LX to 1000Base-LX.
2. Check whether the fiber-optic cable type matches with the SFP transceiver requirement.
 To connect to 1000Base-SX SFP transceiver, please use the multi-mode fiber cable with one side being the male
duplex LC connector type.
To connect to 1000Base-LX SFP transceiver, please use the single-mode fiber cable with one side being the male

duplex LC connector type.
Connect the Fiber Cable

1. Insert the duplex LC connector into the SFP/SFP+ transceiver.
2. Connect the other end of the cable to a device with SFP/SFP+ transceiver installed.
3. Check the LNK/ACT LED of the SFP/SFP+ slot on the front of the Managed Switch. Ensure that the SFP/SFP+
transceiver is operating correctly.
4. Check the Link mode of the SFP/SFP+ port if the link fails. To function with some fiber-NICs or Media Converters, user
has to set the port Link mode to "10G Force", "1000M Force" or "100M Force".
Remove the Transceiver Module

1. Make sure there is no network activity anymore.
2. Remove the Fiber-Optic Cable gently.
3. Lift up the lever of the MGB module and turn it to a horizontal position.
4. Pull out the module gently through the lever.
WDM(LC) Single Mode
WDM(LC) Single Mode
Connector
Interface
10G LC
10G LC
60km 1310nm
60km 1550nm
Fiber Mode Distance
Multi Mode 300m
Single Mode 10km
28
User's Manual of GS-5220-48T4X
1550nm -40 ~ 75 ℃
1310nm -40 ~ 75 ℃
Wavelength (nm) Operating Temp.
0 ~ 60 ℃
850nm
0 ~ 60 ℃
1310nm