4.9.5.1 QoS Egress Port Schedule and Shapers
The Port Scheduler and Shapers for a specific port are configured on this Page. The QoS Egress Port Schedule and Shaper
sscreen in
Figure 4-9-5
appears.
The Page includes the following fields:
Object
Schedule Mode
Queue Shaper Enable
Queue Shaper Rate
Queue Shaper Unit
Queue Shaper Excess
Queue Scheduler
Figure 4-9-5: QoS Egress Port Schedule and Shapers Page Screenshot
Description
Controls whether the scheduler mode is "Strict Priority" or "Weighted" on this
switch port.
Controls whether the queue shaper is enabled for this queue on this switch port.
Controls the rate for the queue shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it is
restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
Controls the unit of measure for the queue shaper rate as "kbps" or "Mbps".
The default value is "kbps".
Controls whether the queue is allowed to use excess bandwidth.
Controls the weight for this queue.
User's Manual of GS-5220-48T4X
174