ARP Parameters
The ARP parameters can be configured when Frame Type "ARP" is selected.
Object
ARP/RARP
Request/Reply
Sender IP Filter
Sender IP Address
Sender IP Mask
Target IP Filter
Target IP Address
Target IP Mask
ARP Sender MAC
Match
Description
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
■
ARP: Frame must have ARP/RARP opcode set to ARP.
■
RARP: Frame must have ARP/RARP opcode set to RARP.
■
Other: Frame has unknown ARP/RARP Opcode flag.
■
Specify the available ARP/RARP opcode (OP) flag for this ACE.
Any: No ARP/RARP OP flag is specified. (OP is "don't-care".)
■
Request: Frame must have ARP Request or RARP Request OP flag set.
■
Reply: Frame must have ARP Reply or RARP Reply OP flag.
■
Specify the sender IP filter for this ACE.
Any: No sender IP filter is specified. (Sender IP filter is "don't-care".)
■
Host: Sender IP filter is set to Host. Specify the sender IP address in the
■
SIP Address field that appears.
Network: Sender IP filter is set to Network. Specify the sender IP address
■
and sender IP mask in the SIP Address and SIP Mask fields that appear.
When "Host" or "Network" is selected for the sender IP filter, you can enter a
specific sender IP address in dotted decimal notation.
When "Network" is selected for the sender IP filter, you can enter a specific
sender IP mask in dotted decimal notation.
Specify the target IP filter for this specific ACE.
Any: No target IP filter is specified. (Target IP filter is "don't-care".)
■
Host: Target IP filter is set to Host. Specify the target IP address in the
■
Target IP Address field that appears.
Network: Target IP filter is set to Network. Specify the target IP address
■
and target IP mask in the Target IP Address and Target IP Mask fields that
appear.
When "Host" or "Network" is selected for the target IP filter, you can enter a
specific target IP address in dotted decimal notation.
When "Network" is selected for the target IP filter, you can enter a specific target
IP mask in dotted decimal notation.
Specify whether frames can hit the action according to their sender hardware
address field (SHA) settings.
0: ARP frames where SHA is not equal to the SMAC address.
■
1: ARP frames where SHA is equal to the SMAC address.
■
Any: Any value is allowed ("don't-care").
■
201
User's Manual of GS-5220-48T4X