Wheels - Stylized Chrome - Winnebago 2014 Navion Owner's Manual

When re-installing the front liner, make sure
to align the stem clearance notch on the back of
the liner with the valve stem.
WARNING
If the notch is not aligned with the valve
stem, the valve stem may be damaged
which could deflate the tire causing
steering or handling problems.
When installing the liner, be sure it is engaged
all around the perimeter (outside edge) equally.
Note: If the edge on one side is pushed in before
the other, it may be difficult to complete
the push on procedure.
Further Information
See the chassis manufacturer's user guide
provided in your InfoCase for complete
instructions and re-torque information.
WARNING
DO NOT operate the vehicle with less
than all 6 nuts installed and properly
torqued.
WHEELS – STYLIZED CHROME
®
(Mercedes-Benz Sprinter Chassis)
–If Equipped
The stylized wheel on your coach has bright
(chrome) lug nuts and washers. Because the hex
on the specialized lug nut is larger than the
chassis supplied lug wrench, an adapter is
provided (stored with the lug wrench) to tighten
or remove the bright (chrome) lug nuts.
SAFETY AND PRECAUTIONS
Chrome Washer
Chrome Adapter
Stylized Chrome Wheel
Removing the Wheel
Note: Reference the chassis manufacturer's user
guide provided in your InfoCase for
complete instructions and cautions on
changing a wheel.
1. Once the vehicle is prepared for wheel
removal, obtain the adapter from the co-driver
foot well compartment and engage the adapter
to the lug nut. The visible hex on the adapter
is the correct size for the lug wrench.
SECTION 2 –
Chrome Lug Nut
2-13