Advertisement
Quick Links
DVD PLAYER WITH
DELUXE SOUND
–If Equipped
The DVD Player is a selectable
function of the multi-featured audio
system. The player unit contains DVD/
CD/MP3/AM-FM Stereo Radio. It also
accepts portable audio player inputs and
it also functions as an alarm clock.
The player is connected directly to
the TV and can output sound to either
the stereo speakers in the TV or to the
Deluxe Sound speakers in the lounge
area of the coach.
Refer to the manufacturer's
information provided in your InfoCase
for complete feature descriptions and
operating instructions.
Interior Speaker System
Interior Speaker Switch
"SPEAKER A"
•
To connect or disconnect the interior
speaker system, press SPEAKER A.
Set TV Video Input
•
Turn TV and Radio/DVD player ON.
•
Press the MODE button on the TV or
the SOURCE button on the remote to
select "INPUT 2".
•
The TV screen
will display
the DVD
player logo
when the
correct input is selected.
Play DVD
•
Insert a DVD "face up" into slot on
lower face of the player.
•
The DVD will begin to load
automatically. The TV screen will
typically display "Reading" or
"Loading".
•
The DVD may load directly
to the main title/menu screen
or it may begin to play
previews. You may be able to
skip previews if desired by
pressing the "Next" button on the
DVD remote until you see the main
menu screen.
•
When the main
menu screen
appears, press
the "Enter"
button on the
remote or
"Play/Pause"
button on
DVD player to begin playing the
main feature. Use the arrow buttons
on the DVD remote to select another
feature to play .
•
Volume is adjusted with the DVD
remote.
TV Sound through Deluxe
Sound Speakers
When watching TV programs alone,
the TV normally plays sound through its
own built-in stereo speakers. If you wish
to connect TV stereo sound output to the
Deluxe Sound speakers for a richer
sound quality, follow these steps:
1. Turn the TV ON.
2. Make sure the Interior Speaker
System is ON.
3. Press the AUX input selection button
(located just below the display on the
face of the Radio/DVD Player.) This
will route the TV stereo sound output
through the Radio/DVD Player and
out to the Deluxe Sound speakers.
4. Select TV channels and adjust
volume using the TV remote.
Further Information
See the manufacturer's quick
reference guide provided in your
InfoCase for complete feature
descriptions and operating instructions.
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Winnebago View Navion
Summary of Contents for Winnebago View Navion
- Page 1 Set TV Video Input DVD player to begin playing the DVD PLAYER WITH main feature. Use the arrow buttons • Turn TV and Radio/DVD player ON. DELUXE SOUND on the DVD remote to select another • Press the MODE button on the TV or feature to play .
- Page 2 Audio-Video System Basic Operation Guide NOTE: See your InfoCase for specific operating guides for audio and video components. Part No. 161501-13-004 Rev. 1302121126 Copyright 2012 Winnebago Industries, Inc. All rights reserved.
Need help?
Do you have a question about the View Navion and is the answer not in the manual?
Questions and answers
how to start a 2017 Winnebago Navon. Batteries fully charged but when key turned nothing happens even instruments dead
If a 2017 Winnebago Navion won't start and the instruments are dead despite fully charged batteries, the issue could be that the chassis battery is disconnected. The manual recommends unplugging the chassis battery connector (located to the right of the accelerator pedal) if the vehicle is unoccupied for extended periods. Reconnecting this connector may resolve the issue. Also, check the Battery Boost switch and fuse/breaker panels for any tripped breakers or blown fuses.
This answer is automatically generated