Introduction; Maintaining The Unit; Power Requirements - AOR AR-STV Operating Manual

Wireless camera detector

Hide thumbs Also See for AR-STV:

Table of Contents

1 Introduction

Thank you for purchasing the AR-STV Wireless Camera Detector.

The AR-STV is a wireless camera receiver with a 2.5 inch color LCD display, still picture recorder

and sensor that captures analog video signals in real-time. It is mainly designed for use in

surveillance applications.

Its built-in clock allows images to be time-stamped and a (non-supplied) SD memory card can be

used to store images.

may be copied or transferred by any means without the prior written consent of AOR, LTD.

AOR and the AOR logo are trademarks of AOR, LTD. All other trademarks and names are

acknowledged.

There are no internal operator adjustments. In the unlikely event of service being required, please

contact your dealer for technical assistance.

Level of risk:

As the AR-STV operates with a 6 V DC power source, there is little chance of serious injury as long

as common sense is applied.

Observe the polarity of connections if using an external battery charger. DC input is a nominal 6V

DC, with the connector wired center conductor positive. Reverse polarity connection will damage the

AR-STV and could lead to the risk of fire or explosion under severe circumstances.

NEVER connect the AR-STV directly to the AC outlet.

Handling the AR-STV:

Use a soft, dry cloth to gently wipe the AR-STV clean. Never use abrasive cleaners or organic

solvents which may damage certain parts. Treat the unit with care, avoid spillage or leakage of

liquids into the cabinet and power supply. Special care should be taken to avoid liquid entering

around the keys, main dial or via the connectors.

[Note: Never push or knock the LCD screen – it is very fragile and sensitive to shock.]

Special remarks:

Do not use or leave the AR-STV in direct sunlight (especially the TFT display). It is best to avoid

locations where excessive heat, humidity, dust and vibration are expected. Always keep the AR-STV

free from dust and moisture.

The AR-STV is designed for operation from a nominal 6 V DC (4 AA size alkaline battery or Ni-MH

cells). The external 6V DC power supply may be used to charge the internal Ni-MH cells.

Do not use an external power supply when alkaline battery cells are in the unit.

[ Notice: Always disconnect the external power supply when in use.]

Table of Contents