Table of Contents
Advertisement
To return to the search mode, press the MODE switch and REC switch simultaneously three times.
(The operation mode will toggle between the Search mode, Memory mode, SD card mode, and
setting mode.)
5-2-3 Setting mode
There are two (2) setting pages: Setting 1 and Setting 2.
5-2-3-1 Setting 1 screen
Press the MODE switch and REC switch simultaneously
several times (depending on the current operation mode).
(Press the
blue
button to proceed directly to the settings
2 screen if needed.)
Date and Time:
View Time:
Video Polarity:
To change each parameter, press the FREQ. switch upward or downward to move the cursor
•
to the desired position.
Press the FREQ. switch inward to change the color of the selected parameter in reverse
•
polarity with green color.
Press the FREQ. switch upward or downward to change the parameter.
•
To confirm entry, press the FREQ. switch inward.
•
To leave the settings screen, press simultaneously on the
seconds.
Set current date and time for time stamp.
Duration of pause time. (Parameter: 1 ~ 50 (seconds), STOP)
Set the view time before resuming search after detecting video signal. If set to
STOP, the AR-STV stops searching once video signal is detected.
Reverse video polarity (ON/OFF)
blue
and
red
13
buttons once, then wait 3
Advertisement
Table of Contents
