Table of Contents
Advertisement
1 Introduction
1-1 Introduction
Thank you for purchasing the AR-STV Wireless Camera Detector.
The AR-STV is a wireless camera receiver with a 2.5 inch color LCD display, steel picture recorder and sensor
that captures analog video signals in real-time. It is mainly designed for use in surveillance applications.
Its built-in clock allows images to be time-stamped and an optional 1 GB SD memory card can be used to store
up to nearly 2000 images.
© This manual is protected by copyright AOR, LTD. 2008. No information contained in this
manual may be copied or transferred by any means without the prior written consent of AOR,
LTD. AOR and the AOR logo are trademarks of AOR, LTD. All other trademarks and names are
acknowledged.
1-2 Maintaining the unit
There are no internal operator adjustments. In the unlikely event of service being required,
please contact your dealer for technical assistance.
Level of risk
As the AR-STV operates with a 6 V DC power source, there is little chance of serious injury as long as common
sense is applied.
Observe the polarity of connections if using an external battery charger . DC input is a nominal 6V DC, with the
connector wired center conductor positive. Reverse polarity connection will damage the AR-STV and could lead
to the risk of fire or explosion under severe circumstances.
NEVER connect the AR-STV directly to the AC outlet.
Handling the AR-STV
Use a soft, dry cloth to gently wipe the AR-STV clean. Never use abrasive cleaners or organic
solvents which may damage certain parts. Treat the unit with care, avoid spillage or leakage of
liquids into the cabinet and power supply. Special care should be taken to avoid liquid entering
around the keys, main dial or via the connectors.
[Note: Never push or knock the LCD screen – it is very fragile and sensitive to shock.]
Special remarks
Do not use or leave the AR-STV in direct sunlight (especially the TFT display). It is best to avoid
locations where excessive heat, humidity, dust and vibration are expected. Always keep the
AR-STV free from dust and moisture.
1-3 Power requirements
The AR-STV is designed for operation from a nominal 6 V DC (4 AA size alkaline battery or Ni-MH cells). An
external 6V DC power supply (not included), which should be capable of supplying a minimum of 1 amp
continuous may be used to charge the internal Ni-MH cells.
Do not use an external power supply when alkaline battery cells are in the unit.
[ Notice: Always disconnect the external power supply when in use.]
2
Advertisement
Table of Contents
