Table of Contents
Advertisement
OFF: Detected image will NOT be saved on the SD memory card automatically.
NTSC/PAL:
Video detector mode (Parameter: NTSC/ PAL)
Select the video receive mode.
Power Save: Battery power save function (Parameter: ON/ OFF)
ON: To save battery consumption during search, the power to the LCD will be turned
off.
If there is no activity for more than 30 seconds, the power to the LCD will also be
turned off.
OFF: This function will be disabled.
Relay:
Activate / deactivate an alarm relay. (Parameter: ON/ OFF)
The relay output is labeled "ALM out" and located on the right side of the device.
ON: When video signal is detected, then it will trigger the internal alarm relay.
OFF: The relay operation is disabled.
To leave the settings screen, press simultaneously on the
seconds.
5-3 PC interface
The AR-STV provides a USB interface for a PC. (USB cable not supplied)
The memory contents on the SD memory card can be transferred to a PC through the USB
interface.
The stored image has following data format:
Folder's name: \DCIM\100ARSTV
File name: AORSxxxx.JPG (xxxx : 0001 ~ 9999)
Memory card: Memory size: Up to 32GB
File system: FAT32
(Caution: Do not eject the SD memory card while in the data writing mode or reading mode.)
blue
and
red
15
buttons once, then wait 3
Advertisement
Table of Contents
