Table of Contents
Advertisement
(1) 1G 2G 3G (Hz)
The horizontal axis displays the receive frequency. The AR-STV can receive between 900 MHz and
2800 MHz.
(1G indicates 1 GHz in frequency, 2 G for 2 GHz, and 3 G for 3 GHz accordingly.)
(2) V (Video level) N (Noise level)
Video Level
The V (Video) line on the vertical axis displays the video quality threshold level.
Note that video level is NOT related to the signal strength.
Setting the video threshold level higher will display the video signal only with the better quality.
Setting the video threshold level lower will display the video signal even if it is of poor quality.
Noise Level
The N (Noise) line on the vertical axis displays the signal strength.
Setting the Noise threshold level higher can detect only strong signals.
Setting the Noise threshold level lower can detect any weak signals even of poor quality.
Video Level and Noise level can be adjusted on the Search Bank Setting Menu.
5-2 Operation Mode
There are three (3) operation modes with the AR-STV.
Search Mode
•
Memory Mode
•
Setting Mode
•
5-2-1 Search Mode
This is a default operation mode of the AR-STV. On this mode, the AR-STV will search frequencies
between 900 MHz ~ 2.8 GHz (2800 MHz) continuously until signal is detected.
Once the AR-STV detects the signal, it will automatically
switch the screen to display the received video signal.
To stop searching, press the FREQ switch inward. Then
the screen on the right will appear.
8
Advertisement
Table of Contents
