Table of Contents
Advertisement
5-2-3-2 Setting 2 screen
Press the MODE switch and REC switch simultaneously several times (depending on the current
operation mode) until the SETTINGS 1 screen appears, then press the
SETTINGS 2 screen
LCD/AVOUT: Video signal output selection. (Parameter LCD/ AV OUT)
LCD: Displays on the LCD
AV OUT: Output from the VIDEO jack.
(Note: AV output is available only in the Search mode and Memory mode, and when
the power is ON.)
Alarm output: Alarm signal output selection. (Parameter: Buzzer/ Earphone)
Buzzer: Emits buzzer sound
Earphone: Alarm output jack
Alarm output jack pin assignment (3.5 mm stereo)
Tip --- Beep output and alarm output
Ring --- Relay output (this pin will make a short circuit to the ground for 2 seconds
(Relay specifications: 50V DC, 150 mA max. )
Sleeve--- Ground
Auto Save:
Auto image save function (Parameter: ON/ OFF)
ON: Detected image is automatically saved on the SD memory card.
after a video signal is detected).
14
blue
button to get to the
Advertisement
Table of Contents
