This section explains what you can expect to see on the AR-STV LCD monitor screen.
Once the AR-STV is properly powered up, the display will appear on the screen.
(1)
1G 2G 3G (Hz)
The horizontal axis displays the receive frequency. The AR-STV can receive between
900 MHz ~ 2800 MHz.
(1G indicates 1 GHz in frequency, 2 G for 2 GHz, and 3 G for 3 GHz accordingly.)
(2) V (Video level) N (Noise level)
Video Level
The V (Video) line on the vertical axis displays the video quality threshold level.
Note that video level is NOT related to the signal strength.
Setting the video threshold level higher will display the video signal only with the better
quality.
Setting the video threshold level lower will display the video signal even it has a poor
quality.
Noise Level
The N (Noise) line on the vertical axis displays the signal strength.
Setting the Noise threshold level higher can detect only strong signals.
Setting the Noise threshold level lower can detect any weak signals even it has a poor
quality.
Video Level and Noise level can be adjusted on the Search Bank Setting Menu.
5-2 Operation Mode
There are three (3) operation modes with the AR-STV.
Search Mode
Memory Mode
Setting Mode
5-2-1
Search Mode
7