Settings After Installation; [Install] Menu - Aiphone JP-4HD Installation & Operation Manual

SETTINGS AFTER INSTALLATION

The following settings should be done by the installer or the administrator of this system.
Be sure to assign ID to all the sub master stations connected to this system.
NOTE:
It is recommended to set the display language for the screen to the language needed on the master station. (Default language: English)

[INSTALL] menu

First display the [INSTALL] menu window to make the settings
for the installer.
The screen will turn off if approx. one minute elapses with no
*
operation during the setting. When this occurs, display the
[INSTALL] menu window again.
1 If screen is off, press the [HOME] button, or touch
screen to turn it on.
2
Press and hold the [HOME] button, then
SETTINGS → INSTALL .
If the [HOME] button is released before this step has
*
been performed, the display returns to [HOME] window.
A notice message is displayed. You can release the [HOME]
button.
10
or
touch
3
Touch ENTER to continue.
The [INSTALL] menu window is displayed.
Program the settings for each item as needed.
If you wish to return to the previous window, touch
*
BACK
.