Setting And Adjustment Details; Setting The Pin [General] - [Pin Setting]; Call Settings [Call]; Designate Door Stations Allowed To Call-In To This Station [Door Station Settings] - Aiphone JP-4HD Installation & Operation Manual

SETTING AND ADJUSTMENT DETAILS

Setting the PIN
[GENERAL] - [PIN SETTING]
When this station is started up for the fi rst time or after
this station is rebooted, program this setting fi rst.
Some settings require a PIN to prevent content from being
altered by unauthorized individuals.
Create a unique PIN to properly secure settings.
The factory default is "1111".
*
1
From HOME window, touch
GENERAL PIN SETTING .
→
The current PIN entry window is displayed.
2 Enter the current 4-digit PIN. (For fi rst time users,
default is "1111").
3
Touch ENTER .
The new PIN entry window is displayed.
If a wrong PIN is entered, an error message will be
*
displayed requesting the correct PIN.
4
Enter the new 4-digit PIN.
5
When the setting has fi nished, touch
The new PIN is memorized.
You can change the PIN any time by following the above
procedure.
NOTES:
When this station is initialized by the [INSTALL] menu, the PIN
•
returns to "1111" (default).
You must keep the PIN without fail. If you forget the PIN, you
•
must initialize this station by the [INSTALL] menu, thus all the
setting contents return to default.
→
SETTINGS
ENTER .

Call settings [CALL]

You can make the following settings for call.
■ Designate door stations allowed to call-in to
this station [DOOR STATION SETTINGS]
You can set whether or not this station receives a call from
the door station 1 to 4. Individual settings can be programmed
for each door station. When there is a call from a door station
that is set to "DISABLE", no call tone sounds and no image is
displayed on this station.
1
From HOME window, touch
DOOR STATION SETTINGS .
The PIN entry window is displayed.
2 Enter the 4-digit PIN by using the touchscreen, and
then touch ENTER .
"DOOR1" to "DOOR4" are displayed.
If a wrong PIN has been entered, an error message is
*
displayed. Enter correct PIN.
3 To change the setting for "DOOR1", select "ENABLE"
or "DISABLE".
ENABLE ......Allows this station to receive a call from door
station 1.
DISABLE .....Does not allow this station to receive a call
from door station 1.
4 Repeat for other door stations.
5
When the setting has fi nished, touch
SETTINGS → CALL →
ENTER .
15