5. Do not cover the unit with a cloth, etc. Fire or unit trouble could result. 6. Use Aiphone Power Supply or specified one by Aiphone. If not used, it may be a possible cause of fire or malfunction.
2. The master monitor station has manual adjustment switches on both sides. Secure an open space of 5 cm (2") on either side of the monitor. JB-DA JB-2MD JB-2HD B1, B2 JB-2MED JB-2HD JB-2MD JB-DA B1, B2 JB-2MED JB-2MD JB-DA...
Page 4
PS-1820DIN PS-1810DIN [3] Selective door release [4] Video output to video monitor, video switcher, etc. [5] Single door release English [6] Sensor (JB-2MED only) NOTES: 1. For JB-2HD, only functions [1] and [2] are - 4 - (PR) JB-2M(E)D (BL)
WIRING DIAGRAM RELEASE DC 18 V PS-1820DIN PS-1820 230 V AC IN 230V~ 50/60Hz 2A - + 100V - 240V - 50/60 Hz 18 V DC2A JB-DA AIPHO AIPHO MK-DV MK-D V JB-DV JB-DVF JA-D A1 A2 JB-2M(E)D PS-1810DIN 230V AC IN 230V~ 50/60Hz 1A - + 18V DC...
Page 6
Wiring Securely insert wires into each terminal as shown. 1. Master monitor station JB-2MD or JB-2MED 2. Sub monitor station JB-2HD or sub station JA-2SD 3. Video entrance station 4. Video or audio entrance station 5. Power supply +, - (DC 18 V) 6.
Page 8
1 to 5. Otherwise, it will end automatically after 2-1/ 2 minutes. OPERATIONS JB-2MD JB-2MED English Answering a door call (Voice actuate mode) 1. The CALL button of the entrance station is pressed. 2. The chime tone sounds, the caller is seen on the video monitor, and the caller's voice is heard.
5. Press the TALK button momentarily (less than 2 sec.) to end. JB-2MD JB-2MED Instant voice call function 1. The CALL button of the entrance station is pressed. 2. Even without answering, the door area can be seen and heard with video and audio (for approx.
Quickly end room-to-room communication, then the system switches to the calling entrance station. JB-2MD JB-2MED JB-2MD JB-2MED SET PLAY REC CALL CALL MONITOR...
Page 11
7-10 JB-2MED Absence set (Auto absence recording) 1. If the SET button is pressed once (less than 2 sec.), it will light and the unit will be set. 2. If the absence set (auto absence recording) is operating, the SET button flashes to show that there has been a caller (if the image is played, it goes back to being lit).
Page 12
7-13 JB-2MED 01/APR/04 15:30 01/APR/04 15:30 01/APR/04 15:30 01/APR/04 15:30 PLAY 01/APR/04 15:30 01/APR/04 13:25 01/APR/04 10:18 Sub screen enlargement (16-picture/4-frame mode only) 1. If the REC button is pressed when playing a 4-frame picture (P21), the last picture (taken after 14 sec.) is enlarged.
• Scanning lines: • Door release contact: • Dimensions: • Weight: - 13 - English English DC 18 V(JB-2MED, JB-2MD, JB- 2HD). (Max.) 770mA (JB-2MED) (Max.) 670 mA (JB-2MD) (Max.) 250 mA (JB-2HD) Chime and image, approx. 45 sec. (AUTO) Handsfree, approx. 60 sec.
Page 14
WARRANTY Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of two years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty.