Settings Under [System Installation Menu]; Making Network Settings To Each Ip Unit [Network Setting: Individual] - Aiphone IS SERIES Setting Manual

The following shows the setting procedure for the items of each title.
Refer to "SETTING LIST" (→P. 5-11) for details about the settings. Make the settings by also referring to the on-screen instructions.

Settings under [SYSTEM INSTALLATION MENU]

Making network settings to each IP unit
[Network setting: Individual]
Make the settings for network to each IP unit connected
to the system according to your requirements.
1 Click Network setting: Individual in the table of
contents.
2 Make the settings on the following items displayed in
the setting window.
• [IP version]:
Select either "IPv4" or "IPv6" that is used in your network.
• [Host unit setting]:
Set this unit as either "Host unit" or "Client unit". When
set to "Client unit", also enter the IP address of the
IP host unit.
[System name]:
•
Required
When "Host unit" is selected at [Host unit setting], it is
required to enter a name for this system.
Selecting the network setting method
<When "IP version" is set to "IPv4">
Set a (static) IP address to this unit. Select the method
for acquiring a (static) IP address between [DHCP] and
[Static IP Address].
• [DHCP]:
Check this when you will acquire an IP address from
DHCP.
A DHCP server (or a router) is required to acquire
*
an IP address from DHCP. A router may not have
the setup function depending on some models. For
information about setting a router, see the instruction
manual for the router.
• [Static IP Address]:
Check this when you set the static IP address
manually, and then enter the static IP address suitable
for the network you are using, subnet mask, etc.
It is required to enter the static IP address and
*
subnet mask.
22
<When "IP version" is set to "IPv6">
Set an IP address to this unit. Select either [Stateless
Address Autoconfi guration] or [Static IP Address] for
acquiring an IP address.
• [Stateless Address Autoconfi guration]:
Check this when an IPv6-supported router can be
connected to this system and you will aquire an IP
address from Stateless Address Autoconfi guration.
Select this method when you will acquire an IP
*
address from a router that supports DHCPv6-PD
only.
For information about setting a router, see the
*
instruction manual for the router.
• [Static IP Address]:
Check this when you set the static IP address
manually, and then enter the static IP address suitable
for the network you are using, default gateway, etc.
It is required to enter the static IP address.
*
• [Unit name]:
Enter a name for this unit.
* This name is used for searching for this unit in the
network. If not named, this unit is recognized only by
the unit (station) type and MAC address.
[Connection port], [Connection Password]:
•
Enter the port number for controlling communication and
the password for security. Use the same port number
and password among the IP host unit and IP client units
within the site.
NOTES:
The IP host unit must not have an IP address identical to the IP
•
address of a remote site's IP host unit.
The items that cannot be entered or selected are grayed out.
•
3
Click
Temporarily stored
results temporarily.
If you wish to cancel the setting results you have made,
*
click a title in the table of contents or "Refresh" in the
web browser menu.
4
When the settings on this window have fi nished,
update the system from [Updating the system].
(→P. 40)
Required
to save the current setting