L
S
INK
TATUS
The Link Status page displays the current status of the connection to the
wireless network.
The following items are displayed on this page:
Status — The service set identifier of the wireless network and the
◆
MAC address of the connected AP.
Extra Info — Indicates if the link is active.
◆
Channel — Specifies the current channel in use.
◆
Link Speed — The current transmitting and receiving rates.
◆
Throughput — The transmitting and receiving throughputs.
◆
Link Quality — The strength of the receive signal compared to other
◆
interference and noise.
Signal Strength 1~3 — The current receive signal strength indication.
◆
Noise Level — A value that indicates the amount of radio noise on the
◆
current channel.
dBm Format — Displays the signal strength and noise values in dBm.
◆
– 93 –
C
8
| WISP Mode Wireless Configuration
HAPTER
Link Status