Alfa Network AIP-W505 User Manual page 85

WPS Configured — States if WPS for wireless clients has been
◆
configured for this device.
WPS SSID — The service set identifier for the unit.
◆
WPS Auth Mode — The method of authentication used.
◆
WPS Encryp Type — The encryption type used for the unit.
◆
◆ WPS Default Key Index — Displays the WEP default key (1~4).
WPS Key (ASCII) — Displays the WPS security key (ASCII) which can
◆
be used to ensure the security of the wireless network.
AP PIN — Displays the PIN Code for the 11n Router. The default is
◆
exclusive for each unit. (Default: 64824901)
Reset WPS to Default — Resets the WPS settings to factory default
◆
values.
WPS Config — Configures WPS settings for the 11n Router.
WPS Mode — Selects between methods of broadcasting the WPS
◆
beacon to network clients wanting to join the network:
PIN: The 11n Router, along with other WPS devices, such as
■
notebook PCs, cameras, or phones, all come with their own eight-
digit PIN code. When one device, the WPS enrollee, sends a PIN
code to the 11n Router, it becomes the WPS registrar. After
configuring PIN-Code information you must press "Apply" to send
the beacon, after which you have up to two minutes to activate WPS
on devices that need to join the network.
PBC: This has the same effect as pressing the physical WPS button
■
that is located on the front of the 11n Router. After checking this
option and clicking "Apply" you have up to two minutes to activate
WPS on devices that need to join the network.
– 85 –
| Wireless Configuration
C 7
HAPTER
Wi-Fi Protected Setup (WPS)