A
D
LED I
IAGNOSING
NDICATORS
I
Y
C
C
F
OU
ANNOT
ONNECT TO THE
T
ROUBLESHOOTING
Table 4: LED Indicators
Symptom
Action
Power/LAN LEDs are off
◆
WLAN LED is off
◆
◆
LAN LEDs are off
(when port connected)
◆
◆
◆
WAN LED is off
◆
I
NTERNET
Check the following items:
Check that your computer is properly configured for TCP/IP.
◆
Make sure the correct network adapter driver is installed for your PC
◆
operating system. If necessary, try reinstalling the driver.
Check that the network adapter's speed or duplex mode has not been
◆
configured manually. We recommend setting the adapter to auto-
negotiation when installing the network driver.
– 117 –
The AC power adapter may be disconnected. Check
connections between the 11n Router, the power adapter, and
the wall outlet.
The access point radio has been disabled through it's web
management interface. Access the management interface
using a web browser to enable the radio.
Verify that the 11n Router is powered on.
Be sure cables are plugged into both the 11n Router and
corresponding PC.
Verify that the proper cable type is used and its length does
not exceed specified limits.
Check the cable connections for possible defects. Replace the
defective cable if necessary.
There is no detected signal from WAN port. Check
connections and the management interface.