Lan Access Point; Figure 5: Operating As An Access Point - Alfa Network AIP-W505 User Manual

LAN A P
CCESS OINT
The private local network, connected to the LAN port or wireless interface,
provides a Dynamic Host Configuration Protocol (DHCP) server for
allocating IP addresses to local PCs and wireless clients, and Network
Address Translation (NAT) for mapping the multiple "internal" IP addresses
to one "external" IP address.
The public external network, connected to the WAN port, supports DHCP
client, Point-to-Point Protocol over Ethernet (PPPoE) and static IP for
connection to an Internet service provider (ISP) through a cable or DSL
modem.
The 11n Router can provide an access point service for an existing wired
LAN, creating a wireless extension to the local network. The 11n Router
functions as purely an access point when set to Bridge Mode. When used in
this mode, there are no gateway functions between the WAN port and the
LAN and wireless interface.
A Wi-Fi wireless network is defined by its Service Set Identifier (SSID) or
network name. Wireless clients that want to connect to a network must set
their SSID to the same SSID of the network service.

Figure 5: Operating as an Access Point

Desktop PC
(IP: 192.168.2.x)
– 24 –
C
HAPTER
Server
(IP: 192.168.2.x)
LAN Switch
Notebook PC
(IP: 192.168.2.x)
| Network Planning
2

LAN Access Point

Wireless AP/Router