Bridge Mode Connections; Figure 11: Bridge Mode Connection - Alfa Network AIP-W505 User Manual

B M C
RIDGE ODE ONNECTIONS
Set up wireless devices by pressing the WPS button on the 11n Router
4.
or by using the web interface.
more information on accessing the web interface.
In Bridge Mode, the 11n Router operates as a wireless access point,
extending a local wired network to associated wireless clients (PCs or
notebooks with wireless capability). From any nearby location, you can
then make a wireless connection to the 11n Router and access the wired
network resources, including local servers and the Internet.
In Bridge Mode, the 11n Router does not support gateway functions on its
WAN port. Both the LAN port and the WAN ports can be connected to a
local Ethernet LAN.
Bridge Mode is not the factory default mode and must be manually
N :
OTE
set using the web management interface.

Figure 11: Bridge Mode Connection

4.
Set up wireless
devices
Notebook PC
1.
Connect LAN and WAN ports
to PCs or an Ethernet LAN switch
To connect the 11n Router for use as an access point, follow these steps:
Using Ethernet cable connect the 11n Router's LAN and WAN ports to
1.
PCs or a LAN switch.
Power on the 11n Router by connecting the AC power adapter and
2.
plugging it into a power source.
Use ONLY the power adapter supplied with the 11n Router.
C :
AUTION
Otherwise, the product may be damaged.
When you power on the 11n Router, verify that the Power LED turns on
and that the other LED indicators start functioning as described under
"LED Indicators" on page
– 30 –
| Installing the 11n Router
C 3
HAPTER
See "Initial Configuration" on page 32
20.

Bridge Mode Connections

for
2. Connect AC power
adapter to power source
3.
Connect LAN port
to PC